- Call: 905.309.0900
- Toll-Free: 1.866.679.8783
Tub Style Roll-Off
| Hits: | 12368 views |
| Category: | Tub Style Roll Off Containers | Roll Off Containers | Containers |
| Availability: | New, Used |
Description
Tubs are great for hauling garbage, larger tree limbs, tree stumps, brush, grass, leaves, dirt, sand, gravel, mulch, shingles, drywall, 2x4’s, plywood, bricks, small concrete chunks, residential cleanout, light steel, scrap material, turnings, banding, light wall tubing, and busheling.
Personal preference of the hauler and user are the guide. Tub style containers offer a tapered width from front to back and the design of the unit allows the hauler to haul additional units out onto the jobsite reducing the number of trips necessary to get the initial “empty” units to the work location. Tub style containers are a great option for hauling and containment as well as large advertising space for decals. Call one of our representatives today to specify your particular needs and receive a quote for a quality built unit.
Easy dumping design
Specifications
- Understructure: 3" channel 4.1 lbs/ft at 16" apart
- Long rails: 2" X 6" X 1/4" tubing
- Bullnose: Solid 1 1/4" plate burnout
- Floor: 3/16" 2 pieces butt welded
- Push plate: 26" X 16" X 3/16"
- Hook-plate: 23" X 15" X 3/4"
- Wheels: 8" X 10" long rear only
- Wheel axles: 1 1/2" solid round bar
- Nose rollers: 4" diameter x 6" long
- Side wall: 10 or 7 gauge
- Bulk head: 10 or 7 gauge
- Top rail: 4" X 4" X 1/4" tubing (3" X 4" X 7 gauge tubing on containers 16' and less)
- Front post: 3" X 5" formed on 24" centers
- Rear corner post: 3 1/2 " X 7" X 3/16" formed
- Tailgate sheet: Same as side wall
- Tailgate latch: Vertical lift handle
- Tailgate frame: Vertical 3" X 4" X 7 gauge tubing , horizontal 3" X 5" X 10 gauge formed tube with dirt shedder top
- Hinges: Heavy duty machine type, three on 62" and higher
- Paint: Exterior one solid color, interior and bottom prime
- Understructure: 3" channel 4.1 lbs/ft at 16" apart
- Long rails: 2" X 6" X 1/4" tubing
- Bullnose: Solid 1 1/4" plate burnout
- Floor: 3/16" 2 pieces butt welded
- Push plate: 26" X 16" X 3/16"
- Hook-plate: 23" X 15" X 3/4"
- Wheels: 8" X 10" long rear only
- Wheel axles: 1 1/2" solid round bar
- Nose rollers: 4" diameter x 6" long
- Side wall: 10 or 7 gauge
- Bulk head: 10 or 7 gauge
- Top rail: 4" X 4" X 1/4" tubing (3" X 4" X 7 gauge tubing on containers 16' and less)
- Front post: 3" X 5" formed on 24" centers
- Rear corner post: 3 1/2 " X 7" X 3/16" formed
- Tailgate sheet: Same as side wall
- Tailgate latch: Vertical lift handle
- Tailgate frame: Vertical 3" X 4" X 7 gauge tubing , horizontal 3" X 5" X 10 gauge formed tube with dirt shedder top
- Hinges: Heavy duty machine type, three on 62" and higher
- Paint: Exterior one solid color, interior and bottom prime
Options
Outriggers ~ front wheels, Sealed tailgate, 7 gauge sidewalls, Heavy duty cable hook-up, 12” cross member spacing, Crash plates, Heavy duty wheels, Greaseable wheels, Heavy duty skids, 6” x 2” x 3/8” long rails, Cable hook-up, Hook-lift hook-up, Cable / hook-lift hook-up, Heil hook-up, Dempster dino hook-up, Rear cable hook-up
Get a Quote for this Product
 |
This form is currently under development! |