- Call: 905.309.0900
- Toll-Free: 1.866.679.8783
Octagon Packer Receiver
| Hits: | 12137 views |
| Category: | Compactor Receivers | Roll Off Containers | Containers |
| Availability: | New, Used |
Description
Compactor Receivers are the heavy duty container built to attach to a commercial compactor. These compactors often deliver compaction forces of 25 tons or more of force into the container. These containers are often called “packers.”
The Octagon design, with "bullet nose" construction, promotes maximum compaction density from your compactor. The inherent strength of this design enhances its strength to weight ratio, which provides for maximum payload. You can haul more trash with fewer trips, and the smooth sides offer easier application of company signage and decals.
Specifications
- Understructure: 3" channel 4.1 lbs/ft at 16" apart
- Long rails: 2" X 6" X 1/4" tubing
- Bullnose: Solid 1 1/4" plate burnout
- Floor: 3/16" 2 pieces butt welded
- Push plate: 26" X 16" X 3/16"
- Hook-plate: 23" X 15" X 3/4"
- Wheels: 8" X 10" long rear only
- Wheels axles: 1 1/2" solid round bar
- Nose rollers: 4" diameter x 6" long
- Side wall and roof: 7 gauge with 5" taper per side from rear to front
- Bulk head: 7 gauge
- Front post: 3" X 5" formed on 24" centers
- Tailgate sheet: 7 gauge
- Tailgate frame: Vertical and horizontal 3" X 4" X 7 gauge tubing
- Rear corner post: 2" X 6" X 1/4" tubing
- Tailgate latch: Vertical lift handle
- Hinges: Heavy duty machine type, three on 62" and higher
- Paint: Exterior one solid color, interior and bottom prime
Options
Heavy duty packer horseshoe, 8" or 12” cross member spacing, Crash plates, Sign plates, Side post spacing on 18” centers, Heavy duty wheels, Greaseable wheels, Heavy duty skids, 6” x 2” x 3/8” long rails, tubing side posts, Dog house supports, Cam lock, Cable hook-up, Hook-lift hook-up, Cable / hook-lift hook-up, Heil hook-up, Dempster dino hook-up, Rear cable hook-up
Get a Quote for this Product
 |
This form is currently under development! |